CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   Open Source Meshers: Gmsh, Netgen, CGNS, ... (http://www.cfd-online.com/Forums/openfoam-meshing-open/)
-   -   deformed cells after conversion (http://www.cfd-online.com/Forums/openfoam-meshing-open/87196-deformed-cells-after-conversion.html)

GregorS April 13, 2011 13:41

deformed cells after conversion
 
2 Attachment(s)
Hi!

I have a problem with conversion using gmshToFoam when converting grid with small cell height at wall (Low Re case).

In gmsh mesh looks fine (figure 1). But when I convert it using gmshToFoam cells at wall get deformed (figure 2). If I generate coarser mesh, I do not encounter this problem.


All times are GMT -4. The time now is 15:33.