CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ...

Exporting to OpenFOAM mesh with "inner" wall region

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 24, 2012, 06:23
Default Exporting to OpenFOAM mesh with "inner" wall region
  #1
Member
 
Raghavendra
Join Date: Mar 2009
Location: Goteborg, Sweden
Posts: 94
Rep Power: 8
raagh77 is on a distinguished road
Send a message via Yahoo to raagh77 Send a message via Skype™ to raagh77
Dear FOAMers,

I am facing some problem in mesh conversion.


I made the CAD geometry in GAMBIT and also a rough mesh just to test in
OpenFOAM and observed the following

1. The inner wall regions (were it is submerged inside the fluid domain and wall BC being applied in Gambit) is not clearly exported in OpenFOAM mesh
2. The same .msh file was used to run the case in Fluent and it is running
fine. While running the case in the fluent I observed the inner wall
regions being exported with the name <boundarypatchname>.shadow but in OpenFOAM these regions are empty.

From past one week I am struggling here and

I would like to know how these inner walls can be exported to the OpenFOAM
solver.

I tried both the commands fluent3DmeshToFoam and fluentMeshToFoam. in
version 1.6 of OpenFOAM
raagh77 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Near Wall treatments in openfoam with refined mesh spwater OpenFOAM 3 June 1, 2015 05:34
SnappyHexMesh for internal Flow vishwa OpenFOAM Native Meshers: snappyHexMesh and Others 23 August 6, 2014 03:50
vtk mesh or Abaqus mesh to OpenFOAM bigphil Open Source Meshers: Gmsh, Netgen, CGNS, ... 19 August 16, 2011 04:14
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
Questions about CFD Lebeau alexandre Main CFD Forum 1 April 6, 1999 14:23


All times are GMT -4. The time now is 23:50.