[Other] 3D mesh as extrusion -- CFD Online Discussion Forums

January 9, 2013, 07:32	3D mesh as extrusion	#1
batta31 Member Simone Join Date: Sep 2012 Posts: 95 Rep Power: 13	Hi guys, I need your help. I've performed a 2D simulation over a naca0012 arfoil, and now I would like to do a 3D simulation by simply extruding the airfoil. It is enough to put a greater number of points in the third direction and set as "patch" the front and back patches who were set as empty? And, by the way, which boundary condition do you suggest to use in these "new" patches? I as thought to put "symmetryPlane", is it a correct choice? Thanks a lot Simone Last edited by batta31; January 9, 2013 at 09:39.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] No layers in a small gap	bobburnquist	OpenFOAM Meshing & Mesh Conversion	6	August 26, 2015 09:38
3D Hybrid Mesh Errors	DarrenC	ANSYS Meshing & Geometry	11	August 5, 2013 06:42
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 21:11
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55
Icemcfd 11: Loss of mesh from surface mesh option?	Joe	CFX	2	March 26, 2007 18:10

All times are GMT -4. The time now is 10:33.