CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... (http://www.cfd-online.com/Forums/openfoam-meshing-other/)
-   -   ICEM CFD mesh to another open source finite element solver (http://www.cfd-online.com/Forums/openfoam-meshing-other/120560-icem-cfd-mesh-another-open-source-finite-element-solver.html)

srobin11 July 9, 2013 15:11

ICEM CFD mesh to another open source finite element solver
 
hello,

I just wonder can the mesh generated by icem cfd be readable in any other open source finite element solver like openfoam or etc. written in c++ ?
Thanks,

DW:)

-mAx- July 10, 2013 01:20

yes it should be.
If I remember, you can select your solver in ICEM for the mesh export.
So, selecting fluent solver may give you the possibility to use the fluentMeshToFoam or fluent3DMeshToFoam utilities for mesh conversion
check also here: http://www.cfd-online.com/Forums/ope...-openfoam.html


All times are GMT -4. The time now is 18:46.