[Commercial meshers] Regarding MFIX

phani45 · May 24, 2015, 23:39

Hello friends,

I'm planning to work on a problem involving gas-solid fluidized bed with internal heat exchanger (electric rod, tube heat exchanger etc....). I'm willing to use MFIX software as I found that it is most preferred over other Open source software.
My concern is about modelling and meshing in MFIX.
Can anyone let me know whether we can generate complex mesh is MFIX? or shall I shift to any other Open source software?

sharonyue · May 25, 2015, 12:25

Um, I heard of it but never use it, seemingly MFIX is powerful on two-fluid model. Thats all what I know..

If someone can give a comment in detail such as is it robust? can MFIX deal unstructured-mesh? That will be better.

jeff.dietiker · June 1, 2015, 14:06

For moderately complex geometries, you can use predefined shapes (quadric surfaces) to represent cylinders and spheres for example. For more complex geometries, you can use a CAD software to generate an STL file and import it in MFiX.

MFiX uses a structured mesh, and the complex geometry is represented using the Cartesian cut-cell technique.

phani45 · June 8, 2015, 16:07

Thank you Jeff

harsha_kulkarni · December 12, 2018, 06:25

Can we import the mesh created in other software like open foam into mfix????

evamaria · January 27, 2021, 04:33

Did you figure out if and how it is possible to import OpenFOAM Meshes to mfix?

harsha_kulkarni · January 27, 2021, 05:13

Quote:

Originally Posted by evamaria

Did you figure out if and how it is possible to import OpenFOAM Meshes to mfix?

No not yet

May 24, 2015, 23:39	Regarding MFIX	#1
phani45 Member Phanindra Join Date: Jan 2013 Posts: 39 Rep Power: 13	Hello friends, I'm planning to work on a problem involving gas-solid fluidized bed with internal heat exchanger (electric rod, tube heat exchanger etc....). I'm willing to use MFIX software as I found that it is most preferred over other Open source software. My concern is about modelling and meshing in MFIX. Can anyone let me know whether we can generate complex mesh is MFIX? or shall I shift to any other Open source software?

June 8, 2015, 16:07	Thank you Jeff	#4
phani45 Member Phanindra Join Date: Jan 2013 Posts: 39 Rep Power: 13	Thank you Jeff

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mfix code	ljxneu	OpenFOAM	1	October 24, 2019 09:22
A simple problem with mfix	joshzrr	Main CFD Forum	2	October 31, 2013 04:11
New user-defined variable in MFIX	hkarimi	FLUENT	2	August 24, 2011 16:51
Questions about MFIX	amirhhabibi	Main CFD Forum	0	May 11, 2011 09:38
about mfix parallel	pan_zh	Main CFD Forum	0	November 7, 2009 20:34

May 25, 2015, 12:25		#2
sharonyue Senior Member Dongyue Li Join Date: Jun 2012 Location: Beijing, China Posts: 838 Rep Power: 17	Um, I heard of it but never use it, seemingly MFIX is powerful on two-fluid model. Thats all what I know.. If someone can give a comment in detail such as is it robust? can MFIX deal unstructured-mesh? That will be better.

June 1, 2015, 14:06		#3
jeff.dietiker New Member Join Date: Jun 2015 Posts: 1 Rep Power: 0	For moderately complex geometries, you can use predefined shapes (quadric surfaces) to represent cylinders and spheres for example. For more complex geometries, you can use a CAD software to generate an STL file and import it in MFiX. MFiX uses a structured mesh, and the complex geometry is represented using the Cartesian cut-cell technique.

December 12, 2018, 06:25		#5
harsha_kulkarni Senior Member harshawardhank Join Date: Mar 2014 Posts: 209 Rep Power: 13	Can we import the mesh created in other software like open foam into mfix????

January 27, 2021, 04:33		#6
evamaria New Member Join Date: May 2018 Location: Vienna, Austria Posts: 14 Rep Power: 7	Did you figure out if and how it is possible to import OpenFOAM Meshes to mfix?