CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ...

Problem converting gambit mesh to foam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 26, 2008, 06:27
Default Hi, please help. i am get
  #1
New Member
 
S Kumar
Join Date: Mar 2009
Posts: 13
Rep Power: 8
quartzian is on a distinguished road
Hi,

please help. i am getting this error message:

Thanks,

Kumar

****

Create time

Finished lexing
gambitToFoam:
Gambit file format does not provide information about the type of the patch (eg. wall, symmetry plane, cyclic etc).
All the patches have been created as type patch. Please reset after mesh conversion as necessary.

Default patch type set to empty
--> FOAM Warning :
From function boundBox::boundBox(const pointField& points)
in file meshes/boundBox/boundBox.C at line 52
Cannot find bounding box for zero sized pointField, returning zero
Writing polyMesh

End
quartzian is offline   Reply With Quote

Old   September 29, 2008, 18:29
Default Hi Kumar, If I remember cor
  #2
Member
 
Kati Laakkonen
Join Date: Mar 2009
Location: Espoo, Finland
Posts: 36
Rep Power: 8
kati is on a distinguished road
Hi Kumar,

If I remember correctly, this warning is nothing to worry about. Try running checkMesh, and if it gives no errors your mesh is fine.

Regards,
Kati
kati is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem converting fluent mesh vinz OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 20 November 17, 2012 11:54
Problem with Mesh conversion Gambit msh Foam Rachid BANNARI (Bannari) OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 25 September 11, 2011 07:58
Problem in running mesh imported from fluent to foam vishal OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 February 6, 2009 11:05
Converting Gambit Neutral Meshes plmauk OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 20, 2007 07:08
Converting Gambit Neutral Meshes gschaider OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 1 May 12, 2005 12:13


All times are GMT -4. The time now is 16:35.