CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ...

Problem importing mesh in openfoam from fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 1, 2008, 09:24
Default Hi, I've got openfoam v. 1.5 a
  #1
New Member
 
Alessandro Di Placido
Join Date: Mar 2009
Posts: 2
Rep Power: 0
alessandr0 is on a distinguished road
Hi, I've got openfoam v. 1.5 and when I import a mesh from fluent happened the follow thing:
openflu@debian:
~/OpenFOAM/openflu-1.5/run/tutorials/icoFoam/airfoil$ fluentMeshToFoam
/home/alessandro/airfoil.msh
/*---------------------------------------------------------------------------
*\
| =========
| |
| \ / F
ield | OpenFOAM: The Open Source CFD Toolbox |
|
\ / O peration | Version:
1.5 |
| \ / A nd |
Web: http://www.OpenFOAM.org |
| \/ M
anipulation | |
\*---------------------------------------------------------------------------
*/
Exec : fluentMeshToFoam /home/alessandro/airfoil.msh
Date : Aug
28 2008
Time : 00:00:37
Host : debian
PID : 5999
Case :
/home/openflu/OpenFOAM/openflu-1.5/run/tutorials/icoFoam/airfoil
nProcs
: 1

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * //
Create time



cannot open file

file:
/home/openflu/OpenFOAM/openflu-1.5
/run/tutorials/icoFoam/airfoil/system/controlDict at line 0.

From
function regIOobject::readStream(const word&)
in file
db/regIOobject/regIOobjectRead.C at line 66.

FOAM exiting

Where do you think the trouble is?
alessandr0 is offline   Reply With Quote

Old   September 1, 2008, 13:23
Default Do you have a system/controlDi
  #2
Senior Member
 
Francesco Del Citto
Join Date: Mar 2009
Location: Zürich Area, Switzerland
Posts: 215
Rep Power: 9
fra76 is on a distinguished road
Do you have a system/controlDict file in your case directory?
The converter reads from there at least the settings for writing the OpenFOAM mesh to disk.

Francesco
fra76 is offline   Reply With Quote

Old   September 1, 2008, 14:55
Default No, because I don't know what
  #3
New Member
 
Alessandro Di Placido
Join Date: Mar 2009
Posts: 2
Rep Power: 0
alessandr0 is on a distinguished road
No, because I don't know what I have to write on it. I thought to copy another case ControlDict file but then will it be correct? And If I have to do it in this way, what case should I copy? Does it depends on the type of flow(uncompressible,..) or what else?
alessandr0 is offline   Reply With Quote

Old   September 4, 2008, 13:41
Default You can find a lot of answers
  #4
Senior Member
 
Francesco Del Citto
Join Date: Mar 2009
Location: Zürich Area, Switzerland
Posts: 215
Rep Power: 9
fra76 is on a distinguished road
You can find a lot of answers to these questions by reading the user manual...
However, you can copy the whole "system" directory from a similar tutorial case. During the conversion, however, only the lines regarding writing format are used: binary or ascii and compressed or uncompressed. My suggestion is to use ASCII for starting. A bit slower but you can open the mesh and see how it is done.

Hope this helps,
Francesco
fra76 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
A problem about Importing mesh from fluent aderliner OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 1 February 13, 2007 15:44
A problem about Importing mesh from fluent aderliner OpenFOAM Running, Solving & CFD 0 December 19, 2006 00:05
A problem about Importing mesh from fluent aderliner OpenFOAM Running, Solving & CFD 0 December 19, 2006 00:00
Importing a mesh in system memory using C directly to OpenFoam Solvers juanduque OpenFOAM Meshing & Mesh Conversion 1 August 10, 2006 04:15
fluent mesh importing problem Phil FLUENT 0 February 19, 2002 04:44


All times are GMT -4. The time now is 19:19.