|
[Sponsors] |
[Commercial meshers] FluentMeshToFoam and Grid Interfaces |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 9, 2006, 08:49 |
FluentMeshToFoam and Grid Interfaces
|
#1 |
Senior Member
Francesco Del Citto
Join Date: Mar 2009
Location: Zürich Area, Switzerland
Posts: 237
Rep Power: 18 |
Hi!
I have a mesh made with tgrid (a .msh file), with a lot of interior faces that are walls and a boundary layer over some surfaces. I've successfully splitted interior surfaces with splitMeshWithSets by Bernhard Gschaider. I've a problem with the side of the prismatic boundary layer. In fluent, the same mesh is solved defining a "Grid interface" between the patch with rectangles of the boundary layer extrusion (prism-side-8) and a patch containing a triangular remeshing of the same surface (prism-side-8-retri-31), mad in order to have a fulle tetrahedric mesh of the volume. I.e., I have two coinciding patches with different surface meshes. Is it possible to threat such a situation? I've read in the user guide, in the section related to fluentMeshToFoam: "There is currently no support for embedded interfaces and refinement trees.". I'm afraid this is a "No" to my question, but I hope I'm wrong... Francesco |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with grid convergence for turbulent flow around cylinder | aakie | OpenFOAM Running, Solving & CFD | 3 | November 13, 2018 04:39 |
[Commercial meshers] Converting an abaqus mesh using matlab scripts and fluentMeshToFoam | MichaelD | OpenFOAM Meshing & Mesh Conversion | 1 | July 2, 2014 06:34 |
[Commercial meshers] fluentMeshToFoam multidomain mesh conversion problem | Attesz | OpenFOAM Meshing & Mesh Conversion | 12 | May 2, 2013 10:52 |
[Commercial meshers] FluentMeshToFoam | CRT | OpenFOAM Meshing & Mesh Conversion | 3 | May 24, 2012 16:07 |
[Commercial meshers] FluentMeshToFoam hangs with no error | egp | OpenFOAM Meshing & Mesh Conversion | 5 | November 27, 2006 06:28 |