CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... (http://www.cfd-online.com/Forums/openfoam-meshing-other/)
-   -   a probem with fluentMeshToFoam (http://www.cfd-online.com/Forums/openfoam-meshing-other/65332-probem-fluentmeshtofoam.html)

wei_wu June 11, 2009 12:24

a probem with fluentMeshToFoam
 
2 Attachment(s)
hello all,

I encountered a problem when I'm trying to convert my 2D GAMBIT mesh file into a 3D Foam mesh by using the command fluentMeshToFoam. the problem is that after I did the conversion the mesh looks like skewed in someway because, the extruded front face mesh is not identical to the back face mesh which the front one is extruded from, so they are not totally overlapping with each other. I don't know what error may cause this problem, any ideas? I've attached the figures , please take a look.
Thanks

Wei

waynezw0618 June 12, 2009 03:06

Hi it looks like problem of viewing in the paraview?

By the way.
why not add to Chinese QQ group of OpenFOAM:16341598

wei_wu June 12, 2009 08:21

Quote:

Originally Posted by waynezw0618 (Post 219057)
Hi it looks like problem of viewing in the paraview?

By the way.
why not add to Chinese QQ group of OpenFOAM:16341598


thank you very much, problem solved.
also thanks for the QQ information !

waynezw0618 June 13, 2009 10:22

Quote:

Originally Posted by wei_wu (Post 219099)
thank you very much, problem solved.
also thanks for the QQ information !

Wu wei
also welcome to our MSN group :
openfoam@hotmail.com

and anyone work with OF well welcome to chat online!!


All times are GMT -4. The time now is 15:54.