CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... (http://www.cfd-online.com/Forums/openfoam-meshing-other/)
-   -   STARCCM+ mesh for open foam use (http://www.cfd-online.com/Forums/openfoam-meshing-other/72182-starccm-mesh-open-foam-use.html)

Steve4FOAM January 27, 2010 22:40

STARCCM+ mesh for open foam use
 
I know I should read other threads, but in general what is the procedure for converting a STAR-CCM+ poly or trimmed mesh into openfoam

olesen January 28, 2010 03:48

Quote:

Originally Posted by Steve4FOAM (Post 243989)
I know I should read other threads, but in general what is the procedure for converting a STAR-CCM+ poly or trimmed mesh into openfoam

The optional utility 'ccm26ToFoam' is what you should be searching for. There are recent threads about this.


All times are GMT -4. The time now is 22:13.