CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... (http://www.cfd-online.com/Forums/openfoam-meshing-other/)
-   -   bnd file? (http://www.cfd-online.com/Forums/openfoam-meshing-other/72610-bnd-file.html)

bjr February 11, 2010 15:25

bnd file?
 
Does anyone know if starToFoam will run in the absence of a *.bnd file? All I have available at this time is the *.cel and the *.vrt files, but would like to view the grids in the meantime. Many thanks and I apologize for not teasing this answer out of existing threads.

bjr February 11, 2010 18:17

It does run, but I only receive two mesh regions, the "internal mesh" and the "Default_Boundary_Region".

olesen February 12, 2010 03:28

Quote:

Originally Posted by bjr (Post 245769)
It does run, but I only receive two mesh regions, the "internal mesh" and the "Default_Boundary_Region".

That makes sense. Since there is no *.bnd file to define the boundaries, they all land in "Default_Boundary_Region". Although I thought it only worked like this for star4ToFoam and not starToFoam.


All times are GMT -4. The time now is 06:36.