CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ...

Import fluent mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 10, 2010, 17:57
Default Import fluent mesh
  #1
New Member
 
Abdel
Join Date: Jul 2010
Posts: 28
Rep Power: 7
bruxellois4 is on a distinguished road
Hi everybody

i would like to import to OpenFOAM a mesh i've got in Fluent. it was done under windows (i've used fromdos), then fluentMeshtoFoam but that doesn't work, this is the error message (and you can find the .msh here http://www.2shared.com/fadmin/148774...D10D3.dat.html).



// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time



--> FOAM FATAL IO ERROR:
cannot open file

file: /home/moumen/tfe/system/controlDict at line 0.

From function regIOobject::readStream()
in file db/regIOobject/regIOobjectRead.C at line 61.

FOAM exiting

HELP PLZZ!!
bruxellois4 is offline   Reply With Quote

Old   July 15, 2010, 11:23
Default
  #2
Senior Member
 
Stefan Herbert
Join Date: Dec 2009
Location: Darmstadt, Germany
Posts: 129
Rep Power: 8
herbert is on a distinguished road
Hi,

you have to run fluentMeshToFoam from inside an OpenFOAM-case with at least the system/controlDict file inside.

Regards,
Stefan
herbert is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Exporting structured mesh from ICEMCFD to Fluent? jeevan kumar FLUENT 1 January 23, 2012 12:21
[ICEM] Question about boundary type recognition when import mesh from IcemCFD to Fluent dean ANSYS Meshing & Geometry 2 April 23, 2010 10:17
mesh for fluent 12 hsn ANSYS Meshing & Geometry 4 September 17, 2009 14:54
import power flow mesh on fluent JC Main CFD Forum 1 June 11, 2007 12:17
icem: import tecplot mesh David CFX 4 August 9, 2006 08:30


All times are GMT -4. The time now is 17:47.