CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ...

dividing a volume into many parts

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 26, 2010, 07:26
Smile dividing a volume into many parts
  #1
New Member
 
amel
Join Date: Oct 2010
Posts: 14
Rep Power: 6
kasool is on a distinguished road
Good morning
I'm studying mass and heat transfer into a solar chimney and I would like to divide the geometric model to many parts. this will facilitate the meshing of every part in Gambit. Please can someone help me?
kasool is offline   Reply With Quote

Old   November 27, 2010, 12:49
Exclamation meshing a solar chimney 3D
  #2
New Member
 
amel
Join Date: Oct 2010
Posts: 14
Rep Power: 6
kasool is on a distinguished road
I have to mesh a solar chimney in gambit (figure 1) (3D) and I would like to divide the geometry model in 3 parts (the chimney, the collector and the transition section) using the unreal plan method and then mesh every part separetly like in figure 2.
Please can someone help me?
kasool is offline   Reply With Quote

Old   November 27, 2010, 13:02
Question
  #3
New Member
 
amel
Join Date: Oct 2010
Posts: 14
Rep Power: 6
kasool is on a distinguished road
I have to mesh a solar chimney in gambit (figure 1) (3D) and I would like to divide the geometry model in 3 parts (the chimney, the collector and the transition section) using the unreal plan method and then mesh every part separetly like in figure 2.
Please can someone help me?
kasool is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
BlockMesh FOAM warning gaottino OpenFOAM Native Meshers: blockMesh 7 July 19, 2010 14:11
On the damBreak4phaseFine cases paean OpenFOAM Running, Solving & CFD 0 November 14, 2008 22:14
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Native Meshers: blockMesh 10 April 2, 2007 14:00
how to mesh a volume which have two parts? bob FLUENT 11 July 11, 2002 09:17


All times are GMT -4. The time now is 04:10.