CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... (http://www.cfd-online.com/Forums/openfoam-meshing-other/)
-   -   problem about "gambit mesh converts to OF" (http://www.cfd-online.com/Forums/openfoam-meshing-other/89358-problem-about-gambit-mesh-converts.html)

yingkun June 10, 2011 05:28

problem about "gambit mesh converts to OF"
 
hi,foamers
I used gambit to generate my mesh,and defined two interfaces,then in fluent I coupled them,but when I convert it to OF,in the boundary file,there still two interfaces,so I need to specify the boundary conditions,but I don't know what the boundary conditions are,and generally,we don't need to define the internal faces and their boundary condition,so what can I do?
can anybody help me?
Best regards!
ying

olivierG June 10, 2011 06:25

hello,
You may look at "mergeMeshes" or "mergeOrSplitBaffles", and at http://www.openfoam.com/docs/user/st...-utilities.php

regards,
olivier

yingkun June 10, 2011 06:36

hi,olivier,
does it deal with the interface? I don't know what the command mean
thanks!


All times are GMT -4. The time now is 15:27.