[Commercial meshers] problem about "gambit mesh converts to OF"

yingkun · June 10, 2011, 05:28

hi,foamers
I used gambit to generate my mesh,and defined two interfaces,then in fluent I coupled them,but when I convert it to OF,in the boundary file,there still two interfaces,so I need to specify the boundary conditions,but I don't know what the boundary conditions are,and generally,we don't need to define the internal faces and their boundary condition,so what can I do?
can anybody help me?
Best regards!
ying

olivierG · June 10, 2011, 06:25

hello,
You may look at "mergeMeshes" or "mergeOrSplitBaffles", and at http://www.openfoam.com/docs/user/st...-utilities.php

regards,
olivier

yingkun · June 10, 2011, 06:36

hi,olivier,
does it deal with the interface? I don't know what the command mean
thanks!

June 10, 2011, 05:28	problem about "gambit mesh converts to OF"	#1
yingkun Member 桂莹 Join Date: Apr 2011 Posts: 36 Rep Power: 14	hi,foamers I used gambit to generate my mesh,and defined two interfaces,then in fluent I coupled them,but when I convert it to OF,in the boundary file,there still two interfaces,so I need to specify the boundary conditions,but I don't know what the boundary conditions are,and generally,we don't need to define the internal faces and their boundary condition,so what can I do? can anybody help me? Best regards! ying

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] No layers in a small gap	bobburnquist	OpenFOAM Meshing & Mesh Conversion	6	August 26, 2015 09:38
[GAMBIT] Problem with mesh in Gambit	giuseppemerlini	ANSYS Meshing & Geometry	12	November 10, 2014 01:04
[GAMBIT] problem in 3d mesh with gambit	m5m5kh	ANSYS Meshing & Geometry	2	June 5, 2013 04:06
[Commercial meshers] gambit mesh to Foam problem	AmirBaqa1987	OpenFOAM Meshing & Mesh Conversion	1	May 19, 2013 05:26
Problem for making mesh in GAMBIT	chlim	FLUENT	0	July 8, 2005 18:23

June 10, 2011, 06:25		#2
olivierG Senior Member Olivier Join Date: Jun 2009 Location: France, grenoble Posts: 272 Rep Power: 17	hello, You may look at "mergeMeshes" or "mergeOrSplitBaffles", and at http://www.openfoam.com/docs/user/st...-utilities.php regards, olivier

June 10, 2011, 06:36		#3
yingkun Member 桂莹 Join Date: Apr 2011 Posts: 36 Rep Power: 14	hi,olivier, does it deal with the interface? I don't know what the command mean thanks!