CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ...

exporting boundary conditions with pointwise -> openFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 2, 2012, 03:15
Default exporting boundary conditions with pointwise -> openFoam
  #1
Member
 
Elh. A2. BAH
Join Date: Jan 2012
Posts: 64
Rep Power: 5
ebah6 is on a distinguished road
Hello all,

I created a geometry with pointwise and eported it to OpenFoam. But not all my boundary conditions are exported.
I explain:
the geometry is such that the x-y plane is meshed with an unstructured grid (here triangles) and I extruded in the z-direction which is thus structured.
So here my elementary cells are prisms.

Now my problem is that all the boundary conditions parallel to z (i.e. structured) are exported but NOT those in the x-y planes.

Can anyone help me out?

Thank you and best regards.
ebah6 is offline   Reply With Quote

Old   September 5, 2012, 11:33
Default
  #2
Member
 
Jubayer
Join Date: Oct 2009
Location: The University of Western Ontario, London, Ontario
Posts: 42
Blog Entries: 1
Rep Power: 7
cm_jubayer is on a distinguished road
Hi,

This is an issue with Pointwise version (16.04.R2). I figured this out a while ago and reported them to fix it. I guess they did it in the newer version. However, I am using the older one (16.03.R4) which does not have this bug.

Jubayer
cm_jubayer is offline   Reply With Quote

Old   September 16, 2012, 16:57
Default
  #3
Senior Member
 
John Chawner
Join Date: Mar 2009
Location: Fort Worth, Texas, USA
Posts: 219
Rep Power: 9
jchawner is on a distinguished road
The latest release is V17.0 R2 - I suggest you update immediately.
__________________
John Chawner / jrc@pointwise.com / www.pointwise.com
Blog: http://blog.pointwise.com/
on Twitter: @jchawner
jchawner is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Some Problems about the Boundary Conditions in OpenFoam lzgwhy OpenFOAM Running, Solving & CFD 13 July 8, 2014 06:17
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
boundary conditions and mesh exporting vaina74 Open Source Meshers: Gmsh, Netgen, CGNS, ... 2 May 27, 2010 09:38
Please help with flow around car modelling! Tudor Miron CFX 17 March 19, 2004 20:23


All times are GMT -4. The time now is 18:05.