CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[snappyHexMesh] SnappyHexMesh castellation stage creates hole in surface where mesh flows into domain

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 30, 2017, 05:19
Default SnappyHexMesh castellation stage creates hole in surface where mesh flows into domain
  #1
New Member
 
Join Date: Jul 2016
Posts: 4
Rep Power: 9
Dav3dum is on a distinguished road
Hello all!

In my case when I try to mesh a geometry, the castellation stage can't find one of surface of the geometry correctly. On that surface some holes appear, and the mesh floats into the domain through the holes. However, when I check the stl file by surfaceCheck, it says it is not closed but when I open the generated .obj files the surface is closed where the problem occurs. I've attached a picture of the .stl surface and the meshed surface together.
To check if those holes responsible for this problem i've tried to tighten the domain (=reducing the domain length), and-as i expected-these holes were responsible for this problem.
For other similar geometries where the stl is also not closed, but during the meshing these holes don't appear, I get a decent mesh without inflows.

If you could help me out with this problem i'd appreciate that!

Yours sincerly,
David
Attached Images
File Type: png Example.PNG (39.8 KB, 46 views)
Dav3dum is offline   Reply With Quote

Reply

Tags
meshing, snappy

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
y+ = 1 boundary layer mesh with snappyHexMesh Arzed23 OpenFOAM Running, Solving & CFD 6 November 23, 2022 16:15
[snappyHexMesh] snappyHexMesh can't create refimenet region clktp OpenFOAM Meshing & Mesh Conversion 3 February 27, 2022 10:26
[snappyHexMesh] snappyHexMesh Boundary Layer at Corner panpanzhong OpenFOAM Meshing & Mesh Conversion 5 July 3, 2018 06:53
[snappyHexMesh] No layers in a small gap bobburnquist OpenFOAM Meshing & Mesh Conversion 6 August 26, 2015 10:38
[snappyHexMesh] how to mesh a domain splitted in two? aCFDuser OpenFOAM Meshing & Mesh Conversion 6 August 19, 2015 09:27


All times are GMT -4. The time now is 07:54.