CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing & Mesh Conversion (https://www.cfd-online.com/Forums/openfoam-meshing/)
-   -   [snappyHexMesh] Snappyhexmesh- pont inside mesh (https://www.cfd-online.com/Forums/openfoam-meshing/105152-snappyhexmesh-pont-inside-mesh.html)

Dr.Faustus July 24, 2012 05:42
Snappyhexmesh- pont inside mesh
 
hi to everybody :p
i'm founding great difficulties to find the internal point of the mesh
(moreover, i'm not so sure of what this point does)

even if i insert a point on the bounding box it will be shown an error message like this...
Code:
--> FOAM FATAL ERROR:
Point (0 0 1.9) is not inside the mesh or on a face or edge.
Bounding box of the mesh:(-4 -1.95 -4) (8 0.05 4)
:confused::confused::confused::confused:

elvis July 25, 2012 04:02
Hi,

there is a brilliant tutorial (download and untar it "tar -xzf ") I believe it will guide you throught most of your SHM questions

Dr.Faustus July 25, 2012 05:37
Sorry, but the link doesn't work :rolleyes:
Anyway i've found the problem: i was building a blockmesh with an incorrect position of vertexs, so the system of reference was badly rotated

Eloise August 17, 2012 07:03
Hi!
The link to this tutorial is dead, could you update it?
Thanks :)

colinB August 17, 2012 07:57
Hey there,

the site mentioned above is under attack as you can read here:

http://www.cfd-online.com/Forums/ope...er-attack.html

so I guess so far there is no alternative link until everything is restored

regards


All times are GMT -4. The time now is 07:26.