|
[Sponsors] |
[snappyHexMesh] [SHM] Refine mesh along one axis |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 28, 2012, 15:39 |
[SHM] Refine mesh along one axis
|
#1 |
Member
Join Date: May 2012
Posts: 55
Rep Power: 14 |
Hej,
I've meshed my model in gmsh and converted it via gmshToFoam. Now I want to refine the mesh locally. Is it possible to refine the mesh just along one axis (in my case the z-axis)? |
|
November 29, 2012, 08:55 |
|
#2 |
Member
Join Date: May 2012
Posts: 55
Rep Power: 14 |
Couldn't solve the Problem with snappyHexMesh, but refineHexMesh did it.
If the specific cellset is set (via defining a pysical volume in gmsh), refineHexMesh refines the cellset by 2x2x2 cell splitting. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Axis Symmetric Mesh for Circular Pppe | badwalgurpreet | Pointwise & Gridgen | 2 | August 3, 2018 19:06 |
Star CCM Overset Mesh Error (Rotating Turbine) | thezack | Siemens | 7 | October 12, 2016 11:14 |
[mesh manipulation] Importing Multiple Meshes | thomasnwalshiii | OpenFOAM Meshing & Mesh Conversion | 18 | December 19, 2015 18:57 |
[Other] dynamic Mesh with angular velocity not parallel to x axis | donQi | OpenFOAM Meshing & Mesh Conversion | 5 | October 2, 2014 23:19 |
How to control Minximum mesh space? | hung | FLUENT | 7 | April 18, 2005 09:38 |