CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Native Meshers: snappyHexMesh and Others (http://www.cfd-online.com/Forums/openfoam-meshing-snappyhexmesh/)
-   -   snappyHexMesh error (http://www.cfd-online.com/Forums/openfoam-meshing-snappyhexmesh/113100-snappyhexmesh-error.html)

pitpat231 February 12, 2013 09:44

snappyHexMesh error
 
Gooday all, pls am currently trying to mesh a car geometry i downloaded online, i changed the motorBike snappyhexMesh dict, by simply changing the motorBike.stl to R8.stl which is my own car geometry. on running snappyHexMesh on my terminal, the following errors were gotten.

Create mesh for time = 0
Read mesh in = 0.02 s
Overall mesh bounding box : (-5 -4 0) (15 4 8)
Relative tolerance : 1e-06
Absolute matching distance : 2.29783e-05

word::stripInvalid() called for word
For debug level (= 2) > 1 this is considered fatal

please advice me on how 2solve this. thanks

pitpat231 February 12, 2013 09:49

please your advice is urgently needed

chegdan February 12, 2013 11:26

Maybe you could try using HELYX-OS. There is an ongoing discussion at http://www.cfd-online.com/Forums/ope...pyhexmesh.html

For some more detailed information about snappyHexMesh and running from the command line, see the article about SnappyHexMesh on the OpenFOAM wiki




Disclaimer: I work for the company that produces HELYX-OS.


All times are GMT -4. The time now is 03:44.