CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Native Meshers: snappyHexMesh and Others (http://www.cfd-online.com/Forums/openfoam-meshing-snappyhexmesh/)
-   -   Separating areas which don't have layers for visualizing (http://www.cfd-online.com/Forums/openfoam-meshing-snappyhexmesh/114682-separating-areas-dont-have-layers-visualizing.html)

aerogt3 March 15, 2013 09:29

Separating areas which don't have layers for visualizing
 
Hey all,


I am using snappyHexMesh, and am wondering how I can see which areas of my mesh are not getting layers? At the end of the process snappyHexMesh tells you something like this:

Code:

Extruding 670264 out of 690052 faces (97.1%). Removed extrusion at 1 faces.
Added 1894349 out of 2070156 cells (91.5%).

I would basically like to see ONLY these 91.5% of faces where layers were successfully added, or alternatively the 8.5% where layers were not grown. Is there any way to do this?


All times are GMT -4. The time now is 23:29.