CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Native Meshers: snappyHexMesh and Others (http://www.cfd-online.com/Forums/openfoam-meshing-snappyhexmesh/)
-   -   SnappyHexMesh HELP URGENTLY NEEDED (http://www.cfd-online.com/Forums/openfoam-meshing-snappyhexmesh/115043-snappyhexmesh-help-urgently-needed.html)

pitpat231 March 22, 2013 08:42

SnappyHexMesh HELP URGENTLY NEEDED
 
Please, after running snappyhexmesh on my car geometry that i downloaded online and replaced the motorbike.stl file with, the following error were shown, and also the car didnt show on paraFoam,


QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action
QVariantMap DBusMenuExporterDBus::getProperties(int, const QStringList&) const: Condition failed: action

please your urgent help or advice will be appreciated, as am currently running a research on drag coefficients around car bodies. Thanks

pleassssssssssssssssssssssssssssssseeee Help me :(:(:(

pitpat231 March 22, 2013 10:43

also, the Car geometry isnt showing on paraFoam

giack February 27, 2014 05:38

Hello,
I have the same problem..did you find a solution?

Thanks in advance


All times are GMT -4. The time now is 19:48.