CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM Native Meshers: snappyHexMesh and Others

mirrorMesh and Boundary Conditions

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   May 15, 2013, 08:50
Default mirrorMesh and Boundary Conditions
New Member
Join Date: May 2013
Posts: 15
Rep Power: 4
marcus85 is on a distinguished road
Hello Foamers,

i've a Problem with my geometry...i have stl Files of an half model. The Mesh looks good, but after an comparison to the measured flowField i've seen, that the Field isn't i will either mirror my stl's to make a new Mesh or mirror the Mesh and define, that my old Patch symmetrie.stl will be not used in the solving Problem.

Can somebody say me how i can run such a file, because if i only mirror the Mesh and want to solve a rhoSimpleFoam Case it breaks after 1 Iteration and in the half Modell it works fine with my demand for velocity on the Inlet and a demand for pressure on the outlet.

Thx for your supplies and sorry for my Englisch=)


marcus85 is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with mirrorMesh anita OpenFOAM Mesh Utilities 4 November 9, 2009 13:00

All times are GMT -4. The time now is 06:59.