[Dadou]

Dear Foamers,

First of all, I am sorry if there's already a thread that treats this topic.
I am trying to use sHM to create a simple geometry. With Salome I created .STL files but it seems that when I put them in the sHM and I run it I get this (see image attached). I used separate STL files (intake(1)*, sea) or the one under name ALL which is the merge of both sea and intake(1)

I tried with different stl but alway the same thing. you can find my sHM, blockMesh and the .stl files.

Hope you'll help me thank you

Dadou


*the difference between intake and intake1 is that one of them have 1 more face shared with the sea.

[gelbebanane]

Hi,
through a brief look at your sHMD i saw these errors:

refinementSurfaces
    {
        All.stl
          {

replace All.stl with your name defined under geometry -> "sea"

refinementRegions
    {

        All.stl

same as above

layers
    {
        sphere.stl_firstSolid
        {

you dont use this stl file so uncomment this or change it to your layers.