CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[snappyHexMesh] Export a mesh created with snappyhexmesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 17, 2014, 20:55
Default Export a mesh created with snappyhexmesh
  #1
New Member
 
Join Date: Feb 2014
Posts: 1
Rep Power: 0
Alec is on a distinguished road
Hello !

SnappyHexMesh is a great tool and I have been able to use it with great satisfaction.

However, I could not find so far a solution to export a mesh created with snappyHexMesh in a useful format for some other solvers (like code_saturne).

Do you know of a tool which could convert sHM meshes to cgns or med formats ? (for openfoam222)

So far I was only able to export cgns surfaces of the mesh using engrid. Also, I was able to export sHM meshes in VTK and then convert them for other purposes but it does not work when the mesh has prismatic elements.

Best regards,
Alec is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
y+ = 1 boundary layer mesh with snappyHexMesh Arzed23 OpenFOAM Running, Solving & CFD 6 November 23, 2022 16:15
[snappyHexMesh] No layers in a small gap bobburnquist OpenFOAM Meshing & Mesh Conversion 6 August 26, 2015 10:38
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 07:20
[ICEM] Merge created block resulting in not connected mesh imamwfgf ANSYS Meshing & Geometry 2 October 20, 2013 07:22
CFX4.3 -build analysis form Chie Min CFX 5 July 13, 2001 00:19


All times are GMT -4. The time now is 14:20.