CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Native Meshers: snappyHexMesh and Others

Explain the snapping process.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 6, 2014, 04:24
Question Explain the snapping process.
  #1
New Member
 
avinashjagdale
Join Date: Feb 2014
Location: pune,India
Posts: 26
Rep Power: 3
avinashjagdale is on a distinguished road
Can anyone explain the snapping process along with the associated SnapControls?
The info in user guide is too little to get an insight, for a beginner like me.
avinashjagdale is offline   Reply With Quote

Old   March 8, 2014, 03:52
Default
  #2
Member
 
Pekka Pasanen
Join Date: Feb 2012
Location: Finland
Posts: 38
Rep Power: 5
zordiack is on a distinguished road
Have a look at this pdf, which is a very comprehensive guide to snappyHexMesh. You can safely ignore the parts about HelyxOS if you don't use it.

http://www.hpc.cineca.it/sites/defau...ys-HELYXOS.pdf
zordiack is offline   Reply With Quote

Old   March 9, 2014, 04:53
Default
  #3
New Member
 
avinashjagdale
Join Date: Feb 2014
Location: pune,India
Posts: 26
Rep Power: 3
avinashjagdale is on a distinguished road
@zordiack I have already gone through it. But sadly it has just two slide for explaining snapping process uner snapcontrols. I am not being able to understand clearly what the parameters there means. I have understood castellated process. Just like that ,they don't seem to have given indepth what actually happens under snapcontrol.
avinashjagdale is offline   Reply With Quote

Old   March 10, 2014, 10:21
Default
  #4
Senior Member
 
Join Date: Mar 2010
Location: Germany
Posts: 112
Rep Power: 7
cutter is on a distinguished road
Also have a look at https://sites.google.com/site/snappy...ppyhexmeshdict.

Cutter
cutter is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Snapping not enough (even with surfaceFeatureExtract) ironclad OpenFOAM Native Meshers: snappyHexMesh and Others 1 November 8, 2013 03:58
How to setup a simple OpenFOAM cluster? TommiPLaiho OpenFOAM Installation 3 October 27, 2013 16:15
Coupling of drying process and flow simulation franzdrs Main CFD Forum 0 April 29, 2013 14:11
Weird snapping outside a refinement region jasimpson89 OpenFOAM Meshing & Mesh Conversion 0 July 29, 2012 20:46
optimize snapping foam_noob OpenFOAM Native Meshers: snappyHexMesh and Others 28 August 2, 2010 07:46


All times are GMT -4. The time now is 11:40.