CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[Salome] Error while tring to convert mesh generated in salome to openfoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 10, 2014, 09:23
Default Error while tring to convert mesh generated in salome to openfoam
  #1
New Member
 
Arjun
Join Date: Jan 2014
Location: Chennai
Posts: 21
Rep Power: 12
Arjun Jayakumar is on a distinguished road
Dear Friends,
I have modeled a 3D domain using salome. One of the face of model was "partitioned" into two for providing different boundary conditions at two face. Mesh was generated and faces where grouped using "create groups from geometry". Later mesh was exported to unv. while trying to convert the file to OF format it is giving error "ideasUnvToFoam: ideasUnvToFoam.C:1273: int main(int, char**): Assertion `noveau > -1' failed."
Code is as follows
/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 2.3.0 |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
Build : 2.3.0-f5222ca19ce6
Exec : ideasUnvToFoam Mesh_1.unv
Date : Oct 10 2014
Time : 17:32:00
Host : "thinktank"
PID : 4877
Case : /home/arjun/OpenFOAM/arjun-2.3.0/run/tube/interFoam/laminar/fallingFilm
nProcs : 1
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster
allowSystemOperations : Disallowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Processing tag:164
Starting reading units at line 3.
l:1
units:" SI: Meter (newton)"
unitType:2
Unit factors:
Length scale : 1
Force scale : 1
Temperature scale : 1
Temperature offset : 273.15


Processing tag:2420
Skipping tag 2420 on line 9
Skipping section at line 9.

Processing tag:2411
Starting reading points at line 20.
Read 67998 points.

Processing tag:2412
Starting reading cells at line 136019.
First occurrence of element type 11 for cell 1 at line 136020
First occurrence of element type 41 for cell 43 at line 136398
First occurrence of element type 111 for cell 18673 at line 173490
Read 371910 cells and 18546 boundary faces.

Processing tag:2467
Starting reading patches at line 917312.
For group 1 named splitWall trying to read 1342 patch face indices.
For group 2 named inlet trying to read 226 patch face indices.
For group 3 named tubeWall trying to read 3118 patch face indices.
For group 4 named wall trying to read 2586 patch face indices.
For group 5 named outlet trying to read 1708 patch face indices.
For group 6 named frontAndBack trying to read 7132 patch face indices.
For group 7 named symmetry trying to read 772 patch face indices.

Sorting boundary faces according to group (patch)
0: splitWall is faceZone
1: inlet is faceZone
2: tubeWall is patch
3: wall is patch
4: outlet is patch
5: frontAndBack is patch
6: symmetry is patch

Constructing mesh with non-default patches of size:
tubeWall 3118
wall 2586
outlet 1708
frontAndBack 7132
symmetry 772

--> FOAM Warning :
From function polyMesh:olyMesh(... construct from shapes...)
in file meshes/polyMesh/polyMeshFromShapeMesh.C at line 627
Found 1662 undefined faces in mesh; adding to default patch.
Adding cell and face zones
Face Zone inlet 226
ideasUnvToFoam: ideasUnvToFoam.C:1273: int main(int, char**): Assertion `noveau > -1' failed.
Aborted (core dumped)

End of code
where inlet is one of the group which contains partioned face.
when i remove this group from mesh module, the conversion is working fine.
To solve my problem i want that group of face. How to solve this problem.

Thank You in advance
Arjun Jayakumar is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
decomposePar problem: Cell 0contains face labels out of range vaina74 OpenFOAM Pre-Processing 37 July 20, 2020 06:38
[CAD formats] Can OpenFOAM convert foam mesh to stl? liying02ts OpenFOAM Meshing & Mesh Conversion 10 December 30, 2018 11:03
[mesh manipulation] Importing Multiple Meshes thomasnwalshiii OpenFOAM Meshing & Mesh Conversion 18 December 19, 2015 19:57
[ANSYS Meshing] Combine solid mesh generated in workbench mesh and fluid mesh in fluent meshing ? RPjack ANSYS Meshing & Geometry 2 August 27, 2015 10:33
[Other] Error while tring to convert mesh generated in salome to openfoam Arjun Jayakumar OpenFOAM Meshing & Mesh Conversion 0 October 10, 2014 09:46


All times are GMT -4. The time now is 22:38.