CFD Online Discussion Forums - [snappyHexMesh] SnappyHexMesh warning: "Displacement ... points through the surrounding patch faces."

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)

- OpenFOAM Meshing & Mesh Conversion (https://www.cfd-online.com/Forums/openfoam-meshing/)

- - [snappyHexMesh] SnappyHexMesh warning: "Displacement ... points through the surrounding patch faces." (https://www.cfd-online.com/Forums/openfoam-meshing/146296-snappyhexmesh-warning-displacement-points-through-surrounding-patch-faces.html)

Chunsheng

December 23, 2014 09:16

SnappyHexMesh warning: "Displacement ... points through the surrounding patch faces."

Hi there,

When I ran SnappyHexMesh, I had the following message:

Displacement (5.8142979e-10 2.7231409e-10 1.3694218e-09) at mesh point 483739 coord (-0.044907379 -0.015238973 -0.070068371) points through the surrounding patch faces.

What does it mean?

Chunsheng

December 26, 2014 23:50

Problem solved

wyldckat

December 27, 2014 05:17

Greetings Chunsheng and welcome to posting on the forum!

We're glad that you've managed to solve your problem, but it would nice if you could share what the solution was ;)

Best regards,
Bruno

All times are GMT -4. The time now is 00:21.