CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Native Meshers: snappyHexMesh and Others

Multi-region Blockmesh - Refinemesh issues.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 17, 2016, 04:39
Question Multi-region Blockmesh - Refinemesh issues.
  #1
Member
 
Join Date: Nov 2010
Posts: 62
Rep Power: 7
Doug68 is on a distinguished road
==========================================
Sorry please ignore I posted this in the wrong sub-forum.
==========================================

Hi All,

I am getting stuck with running Refinemesh on a region created by Blockmesh
My blockMeshDict file is attached, I don't think that there is an issue in it though, at the moment its just a simple case to try and get the method working.
So there are 2 boxes Region01 and Region02 sharing common vertices at one face and with an identical type of mesh in both boxes.

This runs, all good so far...
Under constant\polyMesh\sets it creates Region01.gz and Region02.gz

Then I attempt to run:

refinemesh -region Region02

And get the error:

--> FOAM FATAL ERROR:
Cannot find file "points" in directory "Region02/polyMesh" in times 0 down to constant

I thought that the files contained in Region01.gz and Region02.gz might be the points files but they do not look correct to be that.

In the UserGuide.pdf section 5.1.2 "The polyMesh description" describes points as:
a list of vectors describing the cell vertices, where the first vector in the list represents vertex 0, the second vector represents vertex 1, etc.;

I can't see how to get the system to create this file though, it does not appear to be an option in blockmeshdict for example, any ideas or am I going the wrong direction completely?

==========================================
Sorry please ignore I posted this in the wrong sub-forum.
==========================================
Attached Files
File Type: txt blockMeshDict.txt (2.1 KB, 0 views)

Last edited by Doug68; February 17, 2016 at 05:54.
Doug68 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
snappyHexMesh on a multiple region blockMesh blais.bruno OpenFOAM Native Meshers: snappyHexMesh and Others 1 February 17, 2015 06:40
Multi Region setup tladd OpenFOAM Pre-Processing 1 April 21, 2014 09:22
Multi Region Meshing bruce OpenFOAM Native Meshers: snappyHexMesh and Others 12 July 31, 2013 10:09
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15
Import gmsh msh to Foam adorean Open Source Meshers: Gmsh, Netgen, CGNS, ... 24 April 27, 2005 08:19


All times are GMT -4. The time now is 10:14.