CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Native Meshers: snappyHexMesh and Others

PimpleDymFOAM simulation problem of Savonius rotor

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 14, 2016, 02:45
Unhappy PimpleDymFOAM simulation problem of Savonius rotor
  #1
New Member
 
Sunzida Ferdoues
Join Date: Apr 2015
Posts: 2
Rep Power: 0
Sunzida is on a distinguished road
Hi, I am right now working with simulation of 2 blade savonius rotor with a concentrated nozzle. I created the mesh in gmsh. I have validated the savonius rotor for both static and dynamic case. I have got a good result for the savonius rotor with concentrated nozzle for static case. But when I am running it for dynamic case then I am not getting any result. The simulation is running for a while and then after some moment it stops to work. I have played with changing transfinite points, expansion ratio, tolerance limit, relaxation factors. But no luck!! I am stuck at the same condition from last two weeks.
Let me give the boundary conditions of my simulation:

Inlet:Patch type( Zero Gradient)
Outlet: Patch type( Zero Gradient)
Top and bottom surface: Wall type( No slip condition)
Nozzle wall: Wall type( No slip condition)
Blade Wall: Wall type( No slip condition)
Turbulence Model: K-omega sst model
Does any body have any idea about it? It will be really great help if anybody could suggest me a way to figure out the problem.
Sunzida is offline   Reply With Quote

Reply

Tags
convergance, k omega sst, savonius rotor

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Continuous casting simulation problem luke.christ FLUENT 3 June 20, 2015 10:31
Pressure dissipation problem in bubble simulation (Riemann problem) ndabir FLUENT 0 June 3, 2015 20:17
Dynamic mesh simulation (pimpleDyMFoam) problem sidlof OpenFOAM Running, Solving & CFD 6 April 12, 2013 11:24
Problem with transient simulation of pump inner flow by pimpleDyMFoam on 1.6-ext renyun0511 OpenFOAM Running, Solving & CFD 0 April 10, 2013 03:26
simulation problem -- convection BC pras FLUENT 4 January 30, 2013 11:41


All times are GMT -4. The time now is 07:20.