CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[snappyHexMesh] multi-Region failed to split one of the regions

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 23, 2010, 12:34
Default multi-Region failed to split one of the regions
  #1
Senior Member
 
Pei-Ying Hsieh
Join Date: Mar 2009
Posts: 334
Rep Power: 18
phsieh2005 is on a distinguished road
Hi,

I have several solid parts. SnappyHexMesh meshed with the correct refinement level for all regions, but, one of the solid regions did not get split from the base mesh. I am wondering if anyone experienced something like this and has a solution for it?

Thanks!

Pei
phsieh2005 is offline   Reply With Quote

Old   April 26, 2010, 08:26
Default
  #2
Member
 
Join Date: Jun 2009
Location: Germany
Posts: 38
Rep Power: 16
suitup is on a distinguished road
Hi, check your blockMesh in paraview and load additional your stl cad files into it.

If a boundary of a blockmesh cell is too near to one of your cad boundaries, snappyhexmesh can't mesh it correctly and problems can occur.

You have to change your blockMesh segmentation or the possition of your cad file.

Maybe it helps, good luck.
suitup is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Foam::error::printStack(Foam::Ostream&) with simpleFoam -parallel U.Golling OpenFOAM Running, Solving & CFD 52 September 23, 2023 04:35
[snappyHexMesh] Multi Region Mesh of a car filter Zephiro88 OpenFOAM Meshing & Mesh Conversion 3 September 11, 2019 20:34
p_rgh initial residual no change with different settings manuc OpenFOAM Running, Solving & CFD 3 June 26, 2018 16:53
Some questions about a multi region case run in parallel zfaraday OpenFOAM Running, Solving & CFD 5 February 23, 2017 11:25
[Other] mesh interface for multi region Mohammad Jam OpenFOAM Meshing & Mesh Conversion 3 December 5, 2016 08:23


All times are GMT -4. The time now is 06:03.