CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Native Meshers: snappyHexMesh and Others

Createpatch and SnappyHexMesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 19, 2010, 21:52
Default Createpatch and SnappyHexMesh
  #1
New Member
 
Join Date: Jul 2010
Posts: 17
Rep Power: 6
hm86 is on a distinguished road
So I created a blockMeshDict file for a quarter cylinder and create two patches there. Then I decreased the matchTolerance in createPatchDict and turned off pointSync and combined two patches to create a cyclic patch. But when I use snappyHexMesh I get the same error I used to get using createPatch (before I turned off pointSync and decreased the matchtolerance). The error is

face 0 area does not match neighbour 200 by 44.3085%.....

Im assuming a matchTolerance in snappyHexMesh would fix this but I dont see that keyword and when i try to run snappyHexMesh with the keyword it gives me the same error. Anyone encounter this before or better yet solved it?

Update - the problem above was solved by redefing the vertices so that the face areas are the same. But now when I run snappyHexMesh it gives me the following error -

Faces do not seem to be correct across coupled boundaries

Anyone know why this is?

Thanks!

Last edited by hm86; July 20, 2010 at 17:15.
hm86 is offline   Reply With Quote

Old   February 3, 2011, 10:50
Default Same Error
  #2
New Member
 
Jerry
Join Date: Feb 2011
Posts: 3
Rep Power: 6
J.Randall is on a distinguished road
Hi hm86,

I'm encountering exactly the same problem as you had. And was wondering whether you found a fix for yours?

Thanks!
J.Randall is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
cyclics and snappyHexMesh fabianpk OpenFOAM Bugs 1 June 22, 2010 12:51
snappyHexMesh createPatch cellLevel ulli OpenFOAM Native Meshers: snappyHexMesh and Others 1 October 1, 2009 10:23


All times are GMT -4. The time now is 00:10.