CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Native Meshers: snappyHexMesh and Others (http://www.cfd-online.com/Forums/openfoam-meshing-snappyhexmesh/)
-   -   processorWeights problem with snappyhexmesh in parallel (http://www.cfd-online.com/Forums/openfoam-meshing-snappyhexmesh/90348-processorweights-problem-snappyhexmesh-parallel.html)

oskar July 7, 2011 10:05

processorWeights problem with snappyhexmesh in parallel
 
I can't seem to get any effect out of using decomposeParDict->parMetisCoeffs->processorWeights values when running snappyhexmesh in parallel. I haven't tried running serial though.

At least in parallel sHM seems to always balance to equal cell count per process, and totally ignore the processorWeights values.

Does anyone know if this is supposed to work?
If so, what might be my problem? parMetis use?

At least to my knowledge, sHM doesn't do any balancing itself, but uses third-party (parMetis) for it, so the problem probably isn't with sHM itself?

edit: using openfoam 1.7.x


All times are GMT -4. The time now is 02:08.