CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing & Mesh Conversion (https://www.cfd-online.com/Forums/openfoam-meshing/)
-   -   [snappyHexMesh] searchableBox at an angle? (https://www.cfd-online.com/Forums/openfoam-meshing/90820-searchablebox-angle.html)

bigbang July 21, 2011 10:27
searchableBox at an angle?
 
Is it possible to define a type searchableBox with an angle?

I want to specify a region for a rectangular area that is not parallel to the yz plane.

Thank you

Fridrik October 17, 2017 03:05
Bump
 
Did you find a solution back in 2011, Want the same thing.

- Fridrik Magnusson

aaron_lan November 1, 2017 22:47
Quote:
Originally Posted by Fridrik (Post 668167)
Did you find a solution back in 2011, Want the same thing.

- Fridrik Magnusson
Any progress on this function?:)

Fridrik November 2, 2017 01:59
Nope :/ i found a workaround, drew it in a CAD program, where it should be, then exported it as an *.stl - Then it had it shape and rotation.

- Fridrik Magnusson

aaron_lan November 2, 2017 02:39
Quote:
Originally Posted by Fridrik (Post 670108)
Nope :/ i found a workaround, drew it in a CAD program, where it should be, then exported it as an *.stl - Then it had it shape and rotation.

- Fridrik Magnusson
Thanks for the workaround.

I saw your another post about editing snappyHexMeshDict with coordinateRotation. I am trying to figure out a solution in this direction. Any suggestion from your experience?


All times are GMT -4. The time now is 04:36.