CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Native Meshers: snappyHexMesh and Others (http://www.cfd-online.com/Forums/openfoam-meshing-snappyhexmesh/)
-   -   How to embed crack(very thin void) into sHM cells. (http://www.cfd-online.com/Forums/openfoam-meshing-snappyhexmesh/91982-how-embed-crack-very-thin-void-into-shm-cells.html)

asamit August 29, 2011 09:45

How to embed crack(very thin void) into sHM cells.
 
1 Attachment(s)
Hello,
I would like to create FanBC shown in the attachment. I hope the patches _half0 and _half1 are identical. How can I do this?
Thank you.


All times are GMT -4. The time now is 05:21.