CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Native Meshers: snappyHexMesh and Others (http://www.cfd-online.com/Forums/openfoam-meshing-snappyhexmesh/)
-   -   Working with SnappyHexMesh (http://www.cfd-online.com/Forums/openfoam-meshing-snappyhexmesh/95965-working-snappyhexmesh.html)

unnikrsn January 9, 2012 07:05

Working with SnappyHexMesh
 
Dear All,

I have been working with SnappyHexMesh... I have a problem with cell refinement.. I thought i could post it here..

Case 1:
nCellBetweenLevels 1
Refinement Levels ( 5 6);
Mode inside;
levels ((1E15 4));

After Meshing
Layer Mesh Cells = 1419740

Cells per refinement level:
0 0
1 0
2 172 <-
3 4002 <-
4 26586
5 143274
6 1245706

But if I define Mode Inside level as 4... I should only receive cells from 4, 5 & 6.

Why is the cells with level 2 and 3 are also refinement and displayed in Log file.

Kindly help.

Regards
Unni


All times are GMT -4. The time now is 05:36.