CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Native Meshers: snappyHexMesh and Others

Working with SnappyHexMesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 9, 2012, 07:05
Default Working with SnappyHexMesh
  #1
New Member
 
Unnikrishnan Mohankumar
Join Date: Apr 2011
Posts: 29
Rep Power: 6
unnikrsn is on a distinguished road
Dear All,

I have been working with SnappyHexMesh... I have a problem with cell refinement.. I thought i could post it here..

Case 1:
nCellBetweenLevels 1
Refinement Levels ( 5 6);
Mode inside;
levels ((1E15 4));

After Meshing
Layer Mesh Cells = 1419740

Cells per refinement level:
0 0
1 0
2 172 <-
3 4002 <-
4 26586
5 143274
6 1245706

But if I define Mode Inside level as 4... I should only receive cells from 4, 5 & 6.

Why is the cells with level 2 and 3 are also refinement and displayed in Log file.

Kindly help.

Regards
Unni
unnikrsn is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
DPM parallel is not working but serial is working johnwinter FLUENT 1 March 27, 2012 02:01
foamMeshToFluent not working with snappyhexmesh calim_cfd OpenFOAM Mesh Utilities 3 January 9, 2012 10:10
Strange Results With snappyHexMesh calebamiles OpenFOAM Running, Solving & CFD 0 August 14, 2011 16:02
stitchMesh and snappyHexMesh gdbaldw OpenFOAM 0 December 23, 2009 03:09
SnappyHexMesh not generate mesh first time mavimo OpenFOAM Mesh Utilities 4 August 26, 2008 07:08


All times are GMT -4. The time now is 11:15.