[snappyHexMesh] Difference in number of cells between Paraview and Log files

unnikrsn · January 9, 2012, 06:21

Dear Foamers,

I have small problem with the number of cells in the log file and the Object Inspector in Paraview

In Log.File for SnappyHexMesh
Layer mesh : cells : 2,484,394

Object Inspector - Paraview
Number of Cells : 7,463,450

I assume that the Log file for SnappyHexMesh is correct..
but why is there a difference in cells in Paraview

Thanks
Unnikrishnan

norman1981 · January 10, 2012, 04:11

Hi Unnikrishnan,

check if you have enabled the "Decompose polyhedra" checkbox in the Object Inspector panel (see the Properties tab).

Regards

Norman

unnikrsn · January 10, 2012, 06:45

Thanks Norman,

But i am using Paraview 3.6.1. and my paraview doesn't show an option to enable "Decompose polyhedra" checkbox in the Object Inspector panel (Properties tab).

what version are you using.
Does it have something to do with DecomposePolyhedra OpenFOAMReader for Paraview.

Thanks
Unnikrishnan

norman1981 · January 10, 2012, 06:53

Yeah you're right, I might be wrong but this checkbox was included starting from Paraview 3.10. I am using Paraview 3.12.0-RC2. Download an up to date paraview version, then create an empty file (.foam extension) in your case directory (in example: touch case.foam). Run paraview and load that file, it should work fine :-)

Regards

Norman

unnikrsn · January 10, 2012, 07:38

Thanks Norman,

Thanks for the reply.

I am still using paraview 3.6.1...
I will be asking my university staff to update the Paraview to 3.12.

I was not able to update it on my own as regular user ( not Root User ).
I tried it with Cmake from Paraview build and install.. But it dint work...
http://paraview.org/Wiki/ParaView:Build_And_Install#Build_Your_Own_CMake
If you have some link for Regular user.. do share it...

Thanks & Regards
Unnikrishnan

norman1981 · January 10, 2012, 07:46

Well, why don't you try a pre-compiled version? You can download the one you need here: http://www.paraview.org/paraview/res.../software.html .
Then unpack the package in your home. Run the package paraview executable. In this way you won't need your system admin anymore :-)

Norman

unnikrsn · January 10, 2012, 09:52

Hi Norman,

I have installed paraview 3.12 with the help of my Lab IT-Incharge...

With the Paraview3.12 the problem seems to be solved.
Now it display the correct results.

Thanks for the help...

Thanks & Regards
Unnikrishnan.

January 10, 2012, 06:45	Difference in number of cells between Paraview and Log files	#3
unnikrsn New Member Unnikrishnan Mohankumar Join Date: Apr 2011 Posts: 29 Rep Power: 15	Thanks Norman, But i am using Paraview 3.6.1. and my paraview doesn't show an option to enable "Decompose polyhedra" checkbox in the Object Inspector panel (Properties tab). what version are you using. Does it have something to do with DecomposePolyhedra OpenFOAMReader for Paraview. Thanks Unnikrishnan

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Keeping intermediate files	OVS	SU2	5	December 5, 2021 11:41
Difference between forceCoeffs function and Paraview force calculation	alexey_sw	OpenFOAM Post-Processing	2	June 9, 2021 04:05
AMI speed performance	danny123	OpenFOAM	21	October 24, 2020 04:13
Shape optimization doesn't converge - Adjoint log file	JPBLourenco	SU2 Shape Design	0	December 11, 2017 08:41
[OpenFOAM] ParaView shows bad cells, checkMesh doesn't seem to notice.	CoolHand	ParaView	2	August 21, 2014 15:58

January 10, 2012, 04:11		#2
norman1981 Member Norman Del Puppo Join Date: Mar 2009 Location: Hinwil, CH Posts: 57 Rep Power: 17	Hi Unnikrishnan, check if you have enabled the "Decompose polyhedra" checkbox in the Object Inspector panel (see the Properties tab). Regards Norman

January 10, 2012, 06:53		#4
norman1981 Member Norman Del Puppo Join Date: Mar 2009 Location: Hinwil, CH Posts: 57 Rep Power: 17	Yeah you're right, I might be wrong but this checkbox was included starting from Paraview 3.10. I am using Paraview 3.12.0-RC2. Download an up to date paraview version, then create an empty file (.foam extension) in your case directory (in example: touch case.foam). Run paraview and load that file, it should work fine :-) Regards Norman

January 10, 2012, 07:46		#6
norman1981 Member Norman Del Puppo Join Date: Mar 2009 Location: Hinwil, CH Posts: 57 Rep Power: 17	Well, why don't you try a pre-compiled version? You can download the one you need here: http://www.paraview.org/paraview/res.../software.html . Then unpack the package in your home. Run the package paraview executable. In this way you won't need your system admin anymore :-) Norman

January 10, 2012, 09:52		#7
unnikrsn New Member Unnikrishnan Mohankumar Join Date: Apr 2011 Posts: 29 Rep Power: 15	Hi Norman, I have installed paraview 3.12 with the help of my Lab IT-Incharge... With the Paraview3.12 the problem seems to be solved. Now it display the correct results. Thanks for the help... Thanks & Regards Unnikrishnan.