CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Native Meshers: snappyHexMesh and Others (http://www.cfd-online.com/Forums/openfoam-meshing-snappyhexmesh/)
-   -   snappyHexMesh for porous - multiple regions without boundaries (http://www.cfd-online.com/Forums/openfoam-meshing-snappyhexmesh/99362-snappyhexmesh-porous-multiple-regions-without-boundaries.html)

perjorgen April 2, 2012 04:01

snappyHexMesh for porous - multiple regions without boundaries
 
Hi

I am using sHM for porousSimpleFoam
As a starting point I used snappyMultiRegionHeater with 2 stl files as input without splitting the mesh
The problem is that sHM defines a boundary between the porous zone and the non-porous zone - when I remove the (wall) boundary from constant/polyMesh/boundary I can run the the application

How can I run sHM with two regions seperated by a stl surface without getting a boundary between the regions?

(If there is a better way I would be happy to know ;)

Thanks in advance

Per


All times are GMT -4. The time now is 02:56.