CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Meshing Format & General Technical (http://www.cfd-online.com/Forums/openfoam-meshing-technical/)
-   -   High aspect ratio microchannel (http://www.cfd-online.com/Forums/openfoam-meshing-technical/109383-high-aspect-ratio-microchannel.html)

michel2008 November 16, 2012 06:19

High aspect ratio microchannel
 
Hello all

I am trying to simulate laminar flow in a microchannel with high aspect ratio about 500 for a microchannel with 2 micron depth and I can not reduce the element size less than 3 micron because of the out of memory problem. When I tried 3 micron element size in the body, the results do not validated by analytical. Is there any help to solve this problem?

Thanks,


All times are GMT -4. The time now is 19:55.