[snappyHexMesh] meshing

vishnunitro · February 20, 2014, 05:12

Hello,

Regarding multiphase flow,

I have 5 stl files, and one stl is a big geometry and other 4stl are very small. I am using snappyHexMeshmand i need a total mesh size of 50,000 cells.

but i can't able to reduce less than 100,000 cells..

please suggest me the ways to reduce the overall cell size..

Ruli · February 25, 2014, 14:03

dear vishnu,
what does "big" and "small" compared to the whole solution domain mean?

Possible ways:
- Reduce base blockMesh fineness (e.g. by using higher grading)
- Reduce domain size
- Reduce snappy max. fineness level

Keep in mind, less cells can lead to poorer accuracy.

Best regards
Julian

vishnunitro · March 5, 2014, 07:57

thankyou for your reply,,

for eg:

I have a big tank coneected with small pipes in a domain..
If i try to reduce the blockMesh fineness or using snappy i am not getting the complete mesh with all pipes and tank..

I mean the pipes are not getting meshed completely..my mesh is getting incomplete...

i have to get complete mesh but with minimum cells, now i dont want quality of mesh..

is there any idea

February 20, 2014, 05:12	meshing	#1
vishnunitro New Member vishnu Join Date: May 2013 Posts: 9 Rep Power: 12	Hello, Regarding multiphase flow, I have 5 stl files, and one stl is a big geometry and other 4stl are very small. I am using snappyHexMeshmand i need a total mesh size of 50,000 cells. but i can't able to reduce less than 100,000 cells.. please suggest me the ways to reduce the overall cell size..

February 25, 2014, 14:03		#2
Ruli Member Julian Langowski Join Date: May 2011 Location: Bremen, Germany Posts: 91 Rep Power: 14	dear vishnu, what does "big" and "small" compared to the whole solution domain mean? Possible ways: - Reduce base blockMesh fineness (e.g. by using higher grading) - Reduce domain size - Reduce snappy max. fineness level Keep in mind, less cells can lead to poorer accuracy. Best regards Julian __________________ πάντα ῥεῖ - Heraclitus

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] only automatic meshing works,	kazra	ANSYS Meshing & Geometry	2	February 23, 2017 11:38
[ICEM] Flow channel meshing problems	StefanG	ANSYS Meshing & Geometry	19	May 15, 2012 06:44
[ANSYS Meshing] Meshing strategy for External Flows	Hybrid	ANSYS Meshing & Geometry	0	January 24, 2012 14:27
Best Meshing scheme for Cylinder	Nutrex	Main CFD Forum	4	July 29, 2008 11:03
Volume Meshing & Face Meshing? singularity of grid	ken	FLUENT	0	September 4, 2003 11:08

March 5, 2014, 07:57		#3
vishnunitro New Member vishnu Join Date: May 2013 Posts: 9 Rep Power: 12	thankyou for your reply,, for eg: I have a big tank coneected with small pipes in a domain.. If i try to reduce the blockMesh fineness or using snappy i am not getting the complete mesh with all pipes and tank.. I mean the pipes are not getting meshed completely..my mesh is getting incomplete... i have to get complete mesh but with minimum cells, now i dont want quality of mesh.. is there any idea