CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Mesh Utilities (http://www.cfd-online.com/Forums/openfoam-meshing-utilities/)
-   -   Moving Mesh Addremove layer (http://www.cfd-online.com/Forums/openfoam-meshing-utilities/61494-moving-mesh-addremove-layer.html)

gbracing February 12, 2009 12:05

Hi all, I just started to u
 
Hi all,

I just started to use OpenFoam a few weeks ago. I performed a few tutorials and now try my own based on engineFoam.

I generated a 3D combustion chamber mesh with gambit and exported it to foam with Piston, CylinderHead and liner patches. I rerun the engineFoam tutorial and the mesh is moving well but I would like to be able to automaticaly add/remove layers in order to avoid as much as possible the mesh deformation which leads to CFL crashes...

Any Idea ?

Thanks for your help

greg

gbracing February 12, 2009 12:12

Sorry for the double post...Co
 
Sorry for the double post...Computer mistake.

greg


All times are GMT -4. The time now is 18:43.