CFD Online URL
[Sponsors]
Home > Forums > OpenFOAM Mesh Utilities

Doesnbt have neighbor cells

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 16, 2008, 00:19
Default hi when i simulation a cube
  #1
Senior Member
 
weihong yao
Join Date: Mar 2009
Posts: 117
Rep Power: 7
ivanyao is on a distinguished road
hi
when i simulation a cube 6*6*6,i define the bottom (0 1 2 3),when i excute the blockmesh and it show bottom (0 1 2 3)doesn't have neighbor cells.my blockmesh.file follow:
arguments "/home/ivan/OpenFOAM/ivan-1.4/run/tutorials/rhoTurbFoam/building" off;

convertToMeters 1;

vertices
(
(-3 -3 0)
(3 -3 0)
(3 3 0)
(-3 3 0)
(-3 -3 6)
(3 -3 6)
(3 3 6)
(-3 3 6)
(-39 -3 0)
(-39 3 0)
(-39 -3 6)
(-39 3 6)
(153 -3 0)
(153 3 0)
(153 -3 6)
(153 3 6)
(-3 -60 0)
(3 -60 0)
(-3 -60 6)
(3 -60 6)
(-3 60 0)
(3 60 0)
(-3 60 6)
(3 60 6)
(-39 -60 0)
(153 -60 0)
(153 60 0)
(-39 60 0)
(-39 -60 6)
(153 -60 6)
(153 60 6)
(-39 60 6)
(-39 -60 60)
(153 -60 60)
(153 60 60)
(-39 60 60)
(-39 -3 60)
(-39 3 60)
(-3 -60 60)
(3 -60 60)
(153 -3 60)
(153 3 60)
(-3 60 60)
(3 60 60)
(-3 -3 60)
(3 -3 60)
(3 3 60)
(-3 3 60)
);

blocks
(
hex (24 16 0 8 28 18 4 10) (36 57 6) simpleGrading (1 1 1)
hex (28 18 4 10 32 38 44 36) (36 57 54) simpleGrading (1 1 1)
hex (16 17 1 0 18 19 5 4) (6 57 6) simpleGrading (1 1 1)
hex (18 19 5 4 38 39 45 44) (6 57 54) simpleGrading (1 1 1)
hex (17 25 12 1 19 29 14 5) (150 57 6) simpleGrading (1 1 1)
hex (19 29 14 5 39 33 40 45) (150 57 54) simpleGrading (1 1 1)
hex (1 12 13 2 5 14 15 6) (150 6 6) simpleGrading (1 1 1)
hex (5 14 15 6 45 40 41 46) (150 6 54) simpleGrading (1 1 1)
hex (2 13 26 21 6 15 30 23) (150 57 6) simpleGrading (1 1 1)
hex (6 15 30 23 46 41 34 43) (150 57 54) simpleGrading (1 1 1)
hex (3 2 21 20 7 6 23 22) (6 57 6) simpleGrading (1 1 1)
hex (7 6 23 22 47 46 43 42) (6 57 54) simpleGrading (1 1 1)
hex (9 3 20 27 11 7 22 31) (36 57 6) simpleGrading (1 1 1)
hex (11 7 22 31 37 47 42 35) (36 57 54) simpleGrading (1 1 1)
hex (8 0 3 9 10 4 7 11) (36 6 6) simpleGrading (1 1 1)
hex (10 4 7 11 36 44 47 37) (36 6 54) simpleGrading (1 1 1)
hex (4 5 6 7 44 45 46 47) (6 6 54) simpleGrading (1 1 1)
);

edges
(
);

patches
(
patch inlet
(
(27 9 11 31)
(37 11 31 35)
(9 8 10 11)
(11 10 36 37)
(8 24 28 10)
(10 28 32 36)
)
patch outlet
(
(25 12 14 29)
(29 14 40 33)
(12 13 15 14)
(14 15 41 40)
(13 26 30 15)
(15 30 34 41)
)
wall front
(
(0 3 7 4)
)
wall <back>
(
(1 2 6 5)
)
wall <left>
(
(0 1 5 4)
)
wall <right>
(
(2 3 7 6)
)
wall <top>
(
(4 5 6 7)
)
empty <wall>
(
(24 16 18 28)
(28 18 38 32)
(16 17 19 18)
(18 19 39 38)
(17 25 29 19)
(19 29 33 39)
(26 21 23 30)
(30 23 43 34)
(21 20 22 23)
(23 22 42 43)
(20 27 31 22)
(22 31 35 42)
(32 38 44 36)
(44 36 37 47)
(47 37 35 42)
(38 39 45 44)
(44 45 46 47)
(47 46 43 42)
(39 33 40 45)
(40 45 46 41)
(41 46 43 34)
(16 24 8 0)
(0 8 9 3)
(3 9 27 20)
(17 16 0 1)
(2 3 20 21)
(25 17 1 12)
(12 1 2 13)
(13 2 21 26)
)
wall <bottom>
(
(0 1 2 3)
)
);

mergePatchPairs
(
);


// ************************************************** *********************** //
could anyone help me?
ivanyao is offline   Reply With Quote

Old   July 16, 2008, 07:49
Default Could you please post the erro
  #2
ngj
Senior Member
 
Niels Gjoel Jacobsen
Join Date: Mar 2009
Location: Rotterdam, The Netherlands
Posts: 1,553
Rep Power: 23
ngj will become famous soon enoughngj will become famous soon enough
Could you please post the error message from blockMesh?

Best regards

Niels
__________________
Please note that I do not use the Friend-feature, so do not be offended, if I do not accept a request.
ngj is offline   Reply With Quote

Old   July 16, 2008, 22:14
Default hi sorry about that the err
  #3
Senior Member
 
weihong yao
Join Date: Mar 2009
Posts: 117
Rep Power: 7
ivanyao is on a distinguished road
hi
sorry about that
the error message is:
FOAM FATAL ERROR : face 0 in patch 8 does not have neighbour cell face: 4(0 1 2 3)#0 Foam::error::printStack(Foam:stream&)
#1 Foam::error::abort()
#2 Foam::polyMesh::facePatchFaceCells(Foam::List<foam ::face> const&, Foam::List<foam::list<int> > const&, Foam::List<foam::list<foam::face> > const&, int) const
#3 Foam::polyMesh::polyMesh(Foam::IOobject const&, Foam::Field<foam::vector<double> > const&, Foam::List<foam::cellshape> const&, Foam::List<foam::list<foam::face> > const&, Foam::List<foam::word> const&, Foam::List<foam::word> const&, Foam::word const&, Foam::List<foam::word> const&)
#4 Foam::blockMesh::createTopology(Foam::IOdictionary &)
#5 Foam::blockMesh::blockMesh(Foam::IOdictionary&)
#6 main
#7 __libc_start_main
#8 __gxx_personality_v0 at /usr/src/packages/BUILD/glibc-2.3/csu/../sysdeps/i386/elf/start.S:122


From function polyMesh::facePatchFaceCells(const faceList& patchFaces,const labelListList& pointCells,const faceListList& cellsFaceShapes,const label patchID)
in file meshes/polyMesh/polyMeshFromShapeMesh.C at line 127.

FOAM aborting
ivanyao is offline   Reply With Quote

Old   July 17, 2008, 05:17
Default Hi Weihong What you are tol
  #4
ngj
Senior Member
 
Niels Gjoel Jacobsen
Join Date: Mar 2009
Location: Rotterdam, The Netherlands
Posts: 1,553
Rep Power: 23
ngj will become famous soon enoughngj will become famous soon enough
Hi Weihong

What you are told, is that the first face (face no. 0) in patch 8 is wrong. It could either be wrong orientation, but in your case, I cannot see any block which include all the points (0 1 2 3).

The specific patch which cause problems is the wall patch in the very bottom after the empty patches.

/ Niels
__________________
Please note that I do not use the Friend-feature, so do not be offended, if I do not accept a request.
ngj is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
neighbor Cell ehsan Main CFD Forum 0 August 15, 2008 08:25
Nearest Neighbor Interpolation? jinwon park Main CFD Forum 0 May 7, 2008 12:40
UDF: how to obtain the neighbor face? Benlong FLUENT 0 May 25, 2007 09:36
Lawson’s neighbor-to-neighbor jump search David Main CFD Forum 0 August 8, 2006 20:10
neighbor faces saghir FLUENT 8 February 16, 2005 07:21


All times are GMT -4. The time now is 02:03.