CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[Commercial meshers] Error in face ordering

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 6, 2008, 05:02
Default Error in face ordering
  #1
New Member
 
Anke
Join Date: Mar 2009
Location: Germany
Posts: 9
Rep Power: 17
anke is on a distinguished road
Hello,

I have created a mesh as fluent.file.
I convertet it with foammesh to fluent.
If I try to run the job I get the following error:


Error in face ordering: mixed used and unused faces at the end of face list.
Number of used faces: 4679411 and face 4679411 is owned by cell 896975#0 Foam::error::printStack(Foam:stream&) in "/soft/OpenFOAM/linux64/OpenFOAM/OpenFOAM-1.4.1/lib/linux64GccDPOpt/libOpenFOAM. so"
#1 Foam::error::abort() in "/soft/OpenFOAM/linux64/OpenFOAM/OpenFOAM-1.4.1/lib/linux64GccDPOpt/libOpenFOAM. so"
#2 Foam::polyMesh::initMesh() in "/soft/OpenFOAM/linux64/OpenFOAM/OpenFOAM-1.4.1/lib/linux64GccDPOpt/libOpenFOAM. so"
#3 Foam::polyMesh::polyMesh(Foam::IOobject const&) in "/soft/OpenFOAM/linux64/OpenFOAM/OpenFOAM-1.4.1/lib/linux64GccDPOpt/libOpenFOAM. so"
#4 Foam::fvMesh::fvMesh(Foam::IOobject const&) in "/soft/OpenFOAM/linux64/OpenFOAM/OpenFOAM-1.4.1/lib/linux64GccDPOpt/libfiniteVol ume.so"
#5 main in "/users/ab13877/OpenFOAM/ab13877-1.4.1/applications/bin/linux64GccDPOpt/topoZona lFoam_EDAG06"
#6 __libc_start_main in "/lib64/tls/libc.so.6"
#7 Foam::regIOobject::readIfModified() in "/users/ab13877/OpenFOAM/ab13877-1.4.1/applications/bin/linux64GccDPOpt/topoZona lFoam_EDAG06"


From function void polyMesh::initMesh()
in file meshes/polyMesh/polyMeshCalcFaceCells.C at line 107.


What could Ihave done wrong.

Anke
anke is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Netgen] Import netgen mesh to OpenFOAM hsieh OpenFOAM Meshing & Mesh Conversion 32 September 13, 2011 06:50
[blockMesh] BlockMeshmergePatchPairs hjasak OpenFOAM Meshing & Mesh Conversion 11 August 15, 2008 08:36
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
[blockMesh] Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Meshing & Mesh Conversion 10 April 2, 2007 15:00
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 05:15


All times are GMT -4. The time now is 22:26.