CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[mesh manipulation] CollapseEdges after makeAxialMesh utility in subversion testcase

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 28, 2008, 19:34
Default CollapseEdges after makeAxialMesh utility in subversion testcase
  #1
New Member
 
Simone.Sa
Join Date: Mar 2009
Location: Rome, Italy
Posts: 9
Rep Power: 17
bonzodeb is on a distinguished road
Hi all!
When I try to use collapseEdges after makeAxialMesh in the testcase of the subversion MakeAxialMesh utility I receive the same error at all times, with different value of merge angle and edge lenght:

Morphing ...
--> FOAM Warning :
From function boundBox::boundBox(const pointField& points)
in file meshes/boundBox/boundBox.C at line 52
cannot find bounding box for zero sized pointFieldreturning zero
--> FOAM Warning :
From function boundBox::boundBox(const pointField& points)
in file meshes/boundBox/boundBox.C at line 52
cannot find bounding box for zero sized pointFieldreturning zero
Collapsing 0 small edges
Collapsing 0 in line edges
#0 Foam::error::printStack(Foam:stream&) in "/home/openflu/OpenFOAM/OpenFOAM-1.4.1/lib/linuxGccDPOpt/libOpenFOAM.so"
#1 Foam::sigSegv::sigSegvHandler(int) in "/home/openflu/OpenFOAM/OpenFOAM-1.4.1/lib/linuxGccDPOpt/libOpenFOAM.so"
#2 Uninterpreted: [0xb7f1e420]
#3 collapseHighAspectFaces(Foam::polyMesh const&, Foam::PackedList<1> const&, double, double, Foam::edgeCollapser&) in "/home/openflu/OpenFOAM/OpenFOAM-1.4.1/applications/bin/linuxGccDPOpt/collapseEd ges"
#4 main in "/home/openflu/OpenFOAM/OpenFOAM-1.4.1/applications/bin/linuxGccDPOpt/collapseEd ges"
#5 __libc_start_main in "/lib/tls/i686/cmov/libc.so.6"
#6 __gxx_personality_v0 in "/home/openflu/OpenFOAM/OpenFOAM-1.4.1/applications/bin/linuxGccDPOpt/collapseEd ges"
Segmentation fault

What's wrong?
Can someone help me to find the right value of edge lenght and merge angle for this testCase?

Thanks

Simone
bonzodeb is offline   Reply With Quote

Old   June 5, 2009, 04:24
Default Problems with collapseEdges
  #2
New Member
 
Join Date: Apr 2009
Posts: 9
Rep Power: 16
OF_User is on a distinguished road
Hello to all,

has anybody found a solution for this problem? Unfortunately I have the same problem and request your help.

thx,

mike
OF_User is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
y+ and u+ values with low-Re RANS turbulence models: utility + testcase florian_krause OpenFOAM 114 August 23, 2023 06:37
Error will loading makeAxialMesh utility in openFOAM-1.6 will_avoid_comm_solvers OpenFOAM 21 October 21, 2014 06:16
collapseEdges (after makeAxialMesh) not worked mechy OpenFOAM 2 November 17, 2011 16:09
makeAxialMesh > collapseEdges!! billynoe OpenFOAM 17 February 21, 2011 05:29
Modification of collapseEdges utility olwi OpenFOAM Bugs 0 September 9, 2008 09:35


All times are GMT -4. The time now is 05:42.