 |
 |
 |
|
|
|
[Sponsors] | ||||
December 1, 2010, 10:25
|
stl geometry trouble
|
#1 |
|
Senior Member
Join Date: Feb 2010
Posts: 213
Rep Power: 17  |
Hi everybody.
I'm testing snappyHexMesh - I used other meshing software - but I have a problem with the stl geometry. I obtain: Code:
Shell ***.stl does not support testing for inside Probably it is not closed. Thanks for your attention. |
|
|
|
|
|
December 7, 2010, 05:11
|
|
#2 |
|
Senior Member
Join Date: Aug 2010
Location: Groningen, The Netherlands
Posts: 216
Rep Power: 18 |
Hi
simple problem: the geometry is not closed you provided and so sHM can not define the inside for the refinement parameter. so you need to close the end of your geometry or change refinement to distance regards Colin |
|
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [snappyHexMesh] SHM does not follow STL geometry well | Illmatic | OpenFOAM Meshing & Mesh Conversion | 7 | July 23, 2016 11:07 |
| [Workbench] Meshing and export mesh from STL geometry | alerfreire | ANSYS Meshing & Geometry | 0 | March 26, 2013 09:25 |
| [ICEM] STL Geometry in ICEM | asal | ANSYS Meshing & Geometry | 3 | February 5, 2013 09:44 |
| fan with geometry stl | Hitomi | OpenFOAM | 1 | August 18, 2011 11:27 |
| vitual _ real | deneb | FLUENT | 3 | January 22, 2007 04:31 |
Linear Mode
