|
[Sponsors] |
[mesh manipulation] 6 subdomain OK--------8 subdomain wrong? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 9, 2009, 07:36 |
6 subdomain OK--------8 subdomain wrong?
|
#1 |
Member
Hai Yu
Join Date: Mar 2009
Location: Harbin
Posts: 67
Rep Power: 17 |
Hi, dear Formers,
I am countering a problem, I am runing turbDyMFoam on GGI. When I use a coarser 2D mesh of about 60000 cells, decomposition to 6 or 8 subdomains are both OK. Then I increase the same geometry to about 90000 cells, only 6 subdomains is OK, when I decompose to 8 subdomains: ----------------------------------------------------------- Reading field rAU if present Starting time loop Courant Number mean: 0 max: 0.00695905 velocity magnitude: 10 Time = 7e-05 --> FOAM Warning : From function min(const UList<Type>&) in file lnInclude/FieldFunctions.C at line 342 empty field, returning zero Evaluation of GGI weighting factors: Largest slave weighting factor correction : 5.1734e-07 average: 5.17339e-07 Largest master weighting factor correction: 5.55112e-16 average: 1.51588e-16 --> FOAM Warning : From function min(const UList<Type>&) in file lnInclude/FieldFunctions.C at line 342 empty field, returning zero BiCGStab: Solving for Ux, Initial residual = 1, Final residual = 3.57257e-15, No Iterations 2 BiCGStab: Solving for Uy, Initial residual = 1, Final residual = 5.81369e-12, No Iterations 2 PCG: Solving for p, Initial residual = 1, Final residual = 8.98239e-11, No Iterations 1176 PCG: Solving for p, Initial residual = 0.0342773, Final residual = 9.52116e-11, No Iterations 790 time step continuity errors : sum local = 5.54927e-13, global = 2.7808e-15, cumulative = 2.7808e-15 PCG: Solving for p, Initial residual = 0.00224453, Final residual = 9.47194e-11, No Iterations 738 PCG: Solving for p, Initial residual = 0.000208696, Final residual = 9.87691e-11, No Iterations 665 time step continuity errors : sum local = 6.00154e-13, global = -2.09637e-15, cumulative = 6.84426e-16 PCG: Solving for p, Initial residual = 2.13993e-05, Final residual = 9.74497e-11, No Iterations 505 PCG: Solving for p, Initial residual = 2.56864e-06, Final residual = 9.93453e-11, No Iterations 432 time step continuity errors : sum local = 6.03417e-13, global = 1.89596e-15, cumulative = 2.58039e-15 PCG: Solving for p, Initial residual = 3.2933e-07, Final residual = 9.43981e-11, No Iterations 407 PCG: Solving for p, Initial residual = 4.86326e-08, Final residual = 9.75431e-11, No Iterations 344 time step continuity errors : sum local = 5.92464e-13, global = -3.66527e-15, cumulative = -1.08488e-15 BiCGStab: Solving for epsilon, Initial residual = 0.995295, Final residual = 6.98742e-11, No Iterations 127 BiCGStab: Solving for k, Initial residual = 1, Final residual = 4.99912e-11, No Iterations 9 ExecutionTime = 10.18 s ClockTime = 11 s -------------------------------------------------- I have look through FieldFunctions.C, but didn't get an idea. Can you give me some hints on what kind of problem this would be like? and I can check that respect. Best Regards yuhai |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
udf error | srihari | FLUENT | 1 | October 31, 2016 14:18 |
Simulation of Axial Fan Flow using A Momentum Source Subdomain | Liam | CFX | 28 | July 16, 2013 08:24 |
Subdomain or Interfaces (CHT) | sandeep_tu | CFX | 8 | July 14, 2009 11:06 |
set temperature on subdomain, in transient mode | nicolas | CFX | 0 | August 16, 2006 06:42 |
CFX-5.5: Meshing subdomain with inflation | Bogesz | CFX | 2 | February 15, 2002 04:27 |