CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Mesh Utilities (http://www.cfd-online.com/Forums/openfoam-meshing-utilities/)
-   -   Importing regions from 3rd party meshing programms (http://www.cfd-online.com/Forums/openfoam-meshing-utilities/69920-importing-regions-3rd-party-meshing-programms.html)

suitup November 9, 2009 12:17

Importing regions from 3rd party meshing programms
 
Dear Foamer,

I'm working with the chmultiregion-solver for a few days, at the moment I'm using cellset, setsToZone and splitMeshRegion-commands getting different regions for simple blockMesh-meshfiles for the simulation.

Now wondering if there is any way to import the regions from a 3rd party meshingprogramm like salome, netgen, gmsh and so on.
Because if I want to define regions from an assembly-mesh it would takes years to get all vektors for cellset and so on to get regionsplitting.

Thanks, and best regards.

suitup November 10, 2009 10:40

Or in another expression: which programms (freeware) provides capability of exporting multi-regioned surfaces and or writing a cellSetFile for regions allocating with setSet.


All times are GMT -4. The time now is 04:40.