CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Mesh Utilities

delete cells, correct mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 28, 2011, 11:35
Default delete cells, correct mesh
  #1
Member
 
ynos
Join Date: Jan 2011
Posts: 37
Rep Power: 7
ynos is on a distinguished road
Hi There,

I use the checkMesh utility:
Exec : checkMesh
Date : Mar 28 2011
Time : 16:17:31
Host : simon-VPCEB1J1E
PID : 3410
Case : /home/simon/Escritorio/mis_test/TEST-MALLA/testsnapEdge/BULB/V70_1
nProcs : 1
SigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create polyMesh for time = 0

Time = 0

Mesh stats
points: 2253256
faces: 5925560
internal faces: 5561625
cells: 1838209
boundary patches: 7
point zones: 0
face zones: 0
cell zones: 0

Overall number of cells of each type:
hexahedra: 1691494
prisms: 0
wedges: 0
pyramids: 0
tet wedges: 0
tetrahedra: 0
polyhedra: 146715

Checking topology...
Boundary definition OK.
Point usage OK.
Upper triangular ordering OK.
Face vertices OK.
Number of regions: 1 (OK).

Checking patch topology for multiply connected surfaces ...
Patch Faces Points Surface topology
zmin 8111 9075 ok (non-closed singly connected)
zmax 4489 4898 ok (non-closed singly connected)
xmin 1335 1447 ok (non-closed singly connected)
ymax 7596 7860 ok (non-closed singly connected)
ymin 900 961 ok (non-closed singly connected)
xmax 1143 1234 ok (non-closed singly connected)
bulb_GID 340361 344468 ok (non-closed singly connected)

Checking geometry...
Overall domain bounding box (-12.1 -1 -2.1) (-8.4 4 0)
Mesh (non-empty, non-wedge) directions (1 1 1)
Mesh (non-empty) directions (1 1 1)
Boundary openness (-2.6271e-16 -1.12183e-15 1.70118e-14) OK.
Max cell openness = 2.8861e-16 OK.
Max aspect ratio = 7.84759 OK.
Minumum face area = 5.67861e-07. Maximum face area = 0.0205671. Face area magnitudes OK.
Min volume = 6.11961e-09. Max volume = 0.0014397. Total volume = 38.1685. Cell volumes OK.
Mesh non-orthogonality Max: 62.5983 average: 10.3867
Non-orthogonality check OK.
Face pyramids OK.
***Max skewness = 6.2148, 36 highly skew faces detected which may impair the quality of the results
<<Writing 36 skew faces to set skewFaces

Failed 1 mesh checks.

End

I would like delete or fix this mesh errors, i was reading in the forum about that (cellSet,setSet,subsetMesh and more....) but i am begginer in OF, i dont understand what
can i do,i need the steps for fix the mesh


I would appreciate any help on this,thanks advanced!!
ynos is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Converting a mesh with splitted cells using fluentMeshToFoam jlpelerin OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 4 April 25, 2011 16:56
How to get polyhedral mesh without additional cells when using foamToVTK chnrdu OpenFOAM Meshing Format & General Technical 4 June 10, 2008 13:08
how to extend FSI 2D codes to 3D, need advises abouziar Main CFD Forum 1 May 30, 2008 04:08
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 18:10


All times are GMT -4. The time now is 11:30.