CFD Online Discussion Forums - [mesh manipulation] visualize the bad elements

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)

- OpenFOAM Meshing & Mesh Conversion (https://www.cfd-online.com/Forums/openfoam-meshing/)

- - [mesh manipulation] visualize the bad elements (https://www.cfd-online.com/Forums/openfoam-meshing/91691-visualize-bad-elements.html)

ynos	August 19, 2011 04:11

visualize the bad elements

Hi there
How is possible visualize the bad cells with paraview???
Thanks

ynos	August 19, 2011 04:12

visualize the bad elements

Sorry
I work the mesh with openfoam
Thanks in advance

chegdan

September 9, 2011 14:35

If you have a set that contains a list of the bad cells, then you can select "include sets" from the object inspector when you first start parafoam. These sets of bad cells can be generated by you, using cellSet, or they can be those produced by checkMesh utility. Hope that helps.

Dan

All times are GMT -4. The time now is 02:15.